Cellular Wildlife Observation
The XINBAI H90 combines motion-triggered wildlife recording with 4G file uploads and GPS positioning. Photos and videos are recorded to a microSD card, while uploaded files can be viewed through the TrailCam_4G app described in the supplied manual.
Key Features
- Selectable photo output up to 36MP and video modes up to 3840×2160.
- Main and switchable side PIR sensors with adjustable sensitivity.
- Photo, video, photo-plus-video and time-lapse functions.
- 4G upload frequency options: real time, specific time or off.
- Standard and High Definition photo upload modes.
- GPS location information and GPS Track movement notification.
- Local playback and USB file transfer.
Choose the Correct Cellular Version
European and North American versions use different LTE bands. Confirm the deployment country, carrier, band compatibility and coverage before ordering. A valid SIM with active data and suitable cellular signal is required. Phone internet access is needed to use the app; the manual does not establish a local camera Wi-Fi connection.
| European version | LTE-FDD B1 / B3 / B7 / B8 / B20 / B28 |
|---|---|
| North American version | LTE-FDD B2 / B4 / B5 / B12 / B13 / B25 / B26 |
Remote Upload Behaviour
Remote access uses file uploads, not a continuous live video stream. The manual describes a cloud video preview as a GIF assembled from three frames taken from the beginning, middle and end of the recorded clip. Retrieve the original video from the memory card. App setting changes synchronize when the camera next turns on or uploads a file. Upload speed and notifications depend on the network and device conditions.
Applications
Designed for recording and observing wildlife. This is a wildlife trail camera rather than a replacement for industrial monitoring equipment. Plan access for battery changes, card backup and signal checks.
Specifications
| Model | H90 |
|---|---|
| Photo output settings | 36MP / 24MP / 16MP / 12MP / 8MP / 4MP / 2MP / 1MP |
| Video resolution options | 3840×2160 / 2688×1520 / 1920×1080 / 1280×720 / 640×360 |
| Time-lapse video output | 1920×1080 / 1280×720 |
| Capture modes | Photo / Video / Photo & Video |
| Photo series | 1 / 2 / 3 / 10 photos |
| Clip length | 3 seconds to 10 minutes |
| Shot lag | 5 seconds to 60 minutes |
| Motion sensors | Main and switchable side PIR sensors; Low / Middle / High sensitivity |
| Time-lapse interval | 5 minutes to 24 hours for TL Video |
| Storage | microSD up to 512GB; Class 10 or faster recommended |
| Battery supply | 12 × 1.5V AA batteries |
| External power | DC 9.0V / 2A adapter; adapter not included |
| Cellular versions | European and North American versions; select for deployment country/operator |
| App | TrailCam_4G, as specified in supplied manual |
| Positioning | GPS with outdoor position acquisition; GPS Track option |
| Connectivity / ports | 4G SIM, microSD, USB, AV and DC input |
| Display | 2.8-inch LCD, per source listing |
Power and Storage
Use twelve matching 1.5V AA batteries or a compatible DC 9.0V/2A supply, observing the marked connector polarity. A memory card is required to save recordings and enter automatic monitoring. Back up files before formatting. Endless Capture overwrites the oldest files when enabled.
Supply and Configuration
The source lists a USB cable, AV cable, mounting strap and wall bracket. Antenna and GPS configuration should match the supplied camera. Confirm batteries, memory card, SIM/data service, adapter and the final accessory bundle in the quotation.
Wholesale Enquiries
Provide the destination country, carrier, quantity and any branding or packaging requirements when requesting a quotation. Cellular version and service compatibility should be confirmed before deployment.






